How to Fix Windows Stuck on Edit Boot Options Screen
Key Notes
- Resetting the CMOS battery can often resolve boot issues.
- Using a wired keyboard may bypass connectivity issues with wireless keyboards.
- Disabling the Edit Boot Options screen via Command Prompt can prevent future occurrences.
Resolving the Edit Boot Options Screen Issue on Windows 11
Encountering the Edit Boot Options screen during startup can be frustrating, especially for users of dual-boot configurations. This guide provides step-by-step solutions to effectively remove this screen and restore normal boot functionality.
Step-by-Step Solutions to Remove the Edit Boot Options Screen
Step 1: Reset the CMOS Battery
The Edit Boot Options screen issue can often be linked to a non-responsive keyboard, frequently caused by a depleted CMOS battery. Here’s how to reset it:
- Disconnect all power cables.
- Remove the CMOS battery from the motherboard.
- Press and hold the power button to discharge any remaining power.
- Locate the CLRMOS pins :
- Use a small flat-head screwdriver to bridge the CLRMOS pins with the jumper for a few seconds.
- Shift the jumper pin for 5 seconds and then return it to the original position.
- Reinsert the CMOS battery and power on the computer.
Pro Tip: Ensure the battery is properly seated to avoid further issues.
Step 2: Utilize a Wired Keyboard
A wireless keyboard may not be recognized during the boot process. To bypass this, connect a wired keyboard:
- Get a wired keyboard from a friend or colleague.
- Connect it directly to your computer.
- Restart your machine and attempt to bypass the Edit Boot Options screen using the wired keyboard.
Pro Tip: Wired keyboards tend to register input during boot better than wireless counterparts.
Step 3: Disable the Edit Boot Options Screen
Once you’re past the boot interface, you can work on removing the Edit Boot Options screen permanently:
- Access the Command Prompt as an administrator by searching ‘CMD’ in the Start menu, right-clicking and selecting ‘Run as administrator.’
- Input the following command and press Enter:
- You should see a message indicating the operation completed successfully, confirming that you have removed the glitching screen.
bcdedit /set optionsedit no
Step 4: Restore BIOS to Default Settings
If previous steps were unsuccessful, restoring BIOS settings may be the solution:
- Access your BIOS setup during start (usually by pressing F2 or Del ).
- Find the option labeled “Load Default Settings” or “Reset to Factory Settings.”
- Save your changes and exit BIOS.
Pro Tip: Misconfigurations in BIOS are frequent causes of boot issues like this.
Additional Tips
- Always verify connections and configurations after making changes.
- Keep your system drivers updated to avoid such issues in the future.
- Backup essential data regularly to mitigate loss during troubleshooting.
Summary
This guide outlined effective solutions to eliminate the Edit Boot Options screen in Windows 11, helping users regain access to their operating systems through methods such as resetting the CMOS battery, using a wired keyboard, and adjusting BIOS settings.
Conclusion
Encountering the Edit Boot Options screen can be a daunting experience for users. By following the steps outlined above, you can effectively troubleshoot and resolve these boot issues, ensuring a smoother experience while using Windows 11. Don’t hesitate to implement best practices to prevent future boot complications.
FAQ (Frequently Asked Questions)
What should I do if my PC is stuck at the boot menu?
If your Windows is stuck at the boot menu, perform a hard reset. Desktop users can unplug from power, while laptop users should remove the battery or allow it to drain. If problems persist, follow our guide on boot troubleshooting.
How do I fix a PC stuck on the “Choose an Option” screen?
If your system is stuck at this menu, navigate to Troubleshoot > Advanced Options. Select Startup Repair and follow the prompts. This should help in resolving your access issues.