How to Fix Windows 11 Update Error Code 0xC1900202 – 0x20008
Key Notes
- Identify if your PC meets the minimum system requirements for Windows 11.
- Ensure TPM and Secure Boot are enabled in UEFI settings.
- Expand the reserved partition as needed to resolve space issues.
Resolving Windows 11 Update Error Code 0xC1900202 – 0x20008
Facing the Windows update error code 0xC1900202 – 0x20008 can disrupt your experience and hinder you from upgrading to Windows 11. Understanding the cause and how to resolve it can help restore your system to optimal functioning.
Troubleshooting Windows 11 Update Error Code 0xC1900202 – 0x20008
When you encounter the error code 0xC1900202 – 0x20008 during your Windows update, it usually indicates a compatibility issue with your hardware or system configuration. Follow these steps carefully to address the problem.
Step 1: Check Your PC’s System Requirements
Before upgrading, ensure your system meets the following minimum specifications: – Processor: 1 GHz or faster, with 2 or more cores on a compatible 64-bit processor or SoC.– RAM: 4 GB or more.– Storage: 64 GB or larger.– TPM: Version 2.0.– Graphics: DirectX 12 compatible with WDDM 2.0 driver.– System firmware: UEFI and Secure Boot capable.– Display: 720p display greater than 9” diagonally, with support for 8 bits per color channel.
Pro Tip: Check your system specifications via Control Panel > System and Security for confirmation.
Step 2: Activate TPM and Secure Boot
To enable TPM and Secure Boot, follow these steps: – Open the Settings app and navigate to Update & Security.– Select Recovery and click Restart Now.– Go to Troubleshoot, click on Advanced Options, then UEFI Firmware Settings, and click Restart.– In the UEFI settings, locate and enable TPM and Secure Boot.
Step 3: Increase the Reserved Partition Size
If required, you can expand the reserved partition to ensure ample space for updates: – Press the Windows key and type Computer Management, then run it as an administrator.– Navigate to Disk Management under Storage.– Right-click on the volume you want to extend and select Extend Volume.– Follow the prompts and specify the amount of space to add in megabytes. Click Finish when done.
Pro Tip: Always back up your data before modifying partitions to avoid data loss.
Summary
By verifying the system requirements, activating TPM and Secure Boot, and adjusting the reserved partition size, you can resolve the Windows update error code 0xC1900202 – 0x20008 and proceed with the upgrade to Windows 11 smoothly.
Conclusion
These troubleshooting steps should guide you through resolving the update issue. Should challenges persist, reaching out to Microsoft Customer Support is advisable for further assistance.
FAQ (Frequently Asked Questions)
What does error code 0xC1900202 – 0x20008 mean?
This error indicates that your system does not meet the minimum requirements necessary for Windows 11 installation.
How can I check my current system specifications?
You can verify your current specifications by navigating to Control Panel > System and Security.