Steps to Resolve UP_DRIVER_ON_MP_SYSTEM Error 0x00000092

Step 1: Update the Problematic Driver

This step involves ensuring all relevant drivers are up-to-date to prevent compatibility issues that could trigger the error.

Step 1.1: Boot in Safe Mode

To update drivers, first restart your computer in Safe Mode:

1. Press Windows + R to launch the Run dialog.
2. Type msconfig and hit Enter to open the System Configuration utility.
3. Navigate to the Boot tab, check the Safe boot option, and select Network.
4. Click Apply and then OK to apply changes.
5. Finally, choose Restart to boot your system into Safe Mode.

Pro Tip: Always ensure to back up your data before performing system changes!

Step 1.2: Update the Drivers

Once in Safe Mode, proceed to update the problematic drivers:

1. Press Windows + R to open the Run dialog again.
2. Enter devmgmt.msc and hit Enter to open Device Manager.
3. Expand each category and look for any device with a yellow exclamation mark, indicating a driver issue.
4. Right-click the problematic device and select Update driver.
5. Choose Search automatically for drivers to let Windows find the latest compatible drivers.

If Windows fails to find suitable drivers, consider using a third-party driver updater or check the manufacturer’s website for manual installation options.

Step 2: Update Windows

You’ve booted into Safe Mode, now ensure your Windows is up to date:

1. Press Windows + I to access the Settings app.
2. Select Windows Update from the menu and click Check for updates.
3. If updates are available, click Download and install. Follow any prompts until installation is complete.
4. After updates finish installing, reboot your system.

Step 3: Rollback the Problematic Driver

If the issue persists, you might consider rolling back the driver to a previous version:

1. Open the Run dialog by pressing Windows + R.
2. Type devmgmt.msc and press Enter to open Device Manager.
3. Locate the device with the yellow exclamation mark, right-click it, and select Properties.
4. In the Driver tab, click the Roll Back Driver option if available.
5. Follow the instructions to complete the rollback and restart your computer.

Step 4: Run the CHKDSK Scan

To check for hard drive issues, you may need to perform a CHKDSK scan:

1. Start your computer and, upon seeing the Windows logo, press the Power button to turn it off. Repeat this three times to trigger the Windows Recovery Environment.
2. Select Troubleshoot, then go to Advanced options and choose Command Prompt.
3. In Command Prompt, type chkdsk /f and hit Enter.
4. Confirm with Y if prompted, and allow the scan to complete before rebooting your computer to apply changes.

Step 5: Perform a System Restore

If all else fails, restoring your system to an earlier state may resolve the issue permanently:

1. Open the Control Panel by typing control panel in the Start menu search bar.
2. Set the View by to Large icons and click Recovery.
3. Choose Open System Restore in the Recovery settings.
4. Click on Choose a different restore point and select your desired restore point followed by Next.
5. Click Finish to initiate the restoration process and allow your computer to restart.

If successful, your system settings will revert to those of the chosen restore point.

What causes the UP_DRIVER_ON_MP_SYSTEM Blue Screen error?

Can third-party software help resolve this issue?