Guide to Resolving Temporarily Full Access Point Errors

2024/03/22

Key Notes

Disconnect any devices not in use to free up connection slots.
Increase the device connection limit on your access point settings.
Toggle between different network bandwidths (2.4 GHz and 5 GHz) for stability.

Solving the Issue of ‘Access Point Temporarily Full’ Error with Effective Strategies

The ‘Access Point Temporarily Full’ message indicates that an access point has reached its device connectivity limit, preventing any new devices from connecting until others are disconnected. This guide provides actionable steps to resolve the issue quickly, allowing users to restore their network connectivity.

Step 1: Disconnect Unnecessary Devices

Step 1.1: Turn Off WiFi on Unused Devices

Simply switch off the WiFi connection on devices that are not currently in use.

Step 1.2: Identify Connected Devices

To find out which devices are currently using the connection:

For Mobile Hotspots:

Step 1.2.1: Access Hotspot Settings

Swipe down to access the notification shade and press and hold the hotspot icon.

Step 1.2.2: Open Connection Management

Navigate to the “ Connection Management ” menu to view connected devices.

Step 1.2.3: Disconnect or Block Devices

From this menu, you can also disconnect or block unnecessary connections.

For Traditional Routers:

Using a web browser, enter the router setup page (check the back of your router for the URL).

Input the username and password to authenticate.

Step 1.2.6: Navigate to Client Settings

Find and open the “ Clients ” settings to view all connected devices.

Step 1.2.7: Disconnect or Block Unwanted Devices

You can either disconnect unnecessary devices manually or block them directly through the interface.

Step 2: Increase the Connected Devices Limit

Step 2.1: Adjust Device Cap

You can often raise the device limit through the settings on your phone or router. Here’s how:

For Phone Hotspot Users:

Step 2.1.1: Open Hotspot Settings

Swipe down your notification shade and hold down the hotspot icon.

Step 2.1.2: Access Connection Management

Navigate to the “ Connection Management ” menu again.

Step 2.1.3: Set Device Connection Limit

Locate the “ Device Connection Limit ” option and raise it to the maximum.

Step 3: Switch to a Different Network Bandwidth

Step 3.1: Toggle Between 2.4 GHz and 5 GHz Bands

Changing your network bandwidth might help avoid congestion. Follow these steps:

Step 3.1.2: Open Wireless Settings

Navigate to the sections for “ Wireless ” settings.

Step 3.1.3: Enable Dual Band

Ensure both the 2.4 GHz and 5 GHz bands are enabled.

Step 3.1.4: Connect to a Band

Click the WiFi icon to connect and select the 5 GHz band.

Step 4: Assess the WiFi Adapter

Step 4.1: Refresh Your WiFi Adapter

If issues persist, check your WiFi adapter:

Step 4.1.1: Open Device Manager

Press Win + X and select Device Manager.

Step 4.1.2: Expand Network Adapters Section

Identify your network adapter and right-click on it.

Step 4.1.3: Disable the Adapter

Select “ Disable device “ and after a moment, re-enable it.

Step 5: Execute a Network Reset

Step 5.1: Reset Network Configuration

This can often resolve persistent issues:

Step 5.1.1: Open Settings

Press Win + I to open the Settings panel.

Step 5.1.2: Navigate to Network Settings

Select the “ Network & Internet ” settings option.

Step 5.1.3: Access Advanced Network Settings

Scroll down and click on “ Advanced Network Settings.”

Step 5.1.4: Find Network Reset Option

Under the “More settings” section, open “ Network Reset.”

Step 5.1.5: Execute the Reset

Click “ Reset now ” and confirm when prompted.

Summary

Resolving the ‘Access Point Temporarily Full’ error involves disconnecting unnecessary devices, increasing connection limits, switching bandwidths, evaluating your WiFi adapter, and performing a network reset. By following these detailed methods, you can restore your internet connectivity and enhance your overall network performance.

Conclusion

Addressing connectivity issues can be frustrating, but by implementing the steps outlined in this guide, you should be able to effectively manage and fix the ‘Access Point Temporarily Full’ error. Stay proactive in handling device connections to maximize your network’s potential.

FAQ (Frequently Asked Questions)

What causes the ‘Access Point Temporarily Full’ error?

This error occurs when an access point has reached its maximum allowed connections, preventing new ones from joining.

How can I check the number of devices connected to my router?

You can check connected devices by logging into your router’s settings page using a web browser.