Fixing Storage Device Abnormality Error 0x00000140: Step-by-Step Guide

The error message Storage_Device_Abnormality_Detected, accompanied by the code 0x00000140, is a somewhat ambiguous Blue Screen of Death (BSOD) issue. While it primarily impacts developers, ordinary users may also encounter this error. If you find yourself facing this situation, follow the steps outlined below to resolve the issue.

What steps can I take to resolve the Storage_Device_Abnormality_Detected error?

1. Reboot your device

1. Hold down the Power button on your device to switch it off.
2. After waiting a moment, power it back on and see if the error reappears.
3. If your device has a dedicated Restart option, consider using that instead.

For Surface device owners, follow these instructions:

1. Press and hold the Power button to completely turn off the device.
2. Detach all peripheral devices, including the SD card.
3. Press the Power button once more to turn the device on again.

2. Inspect your storage device

1. If feasible, remove your SSD from the device.
2. Connect it to a different computer to verify its functionality.
3. If it doesn’t operate, replacing the drive may be your best option.

As previously mentioned, the Storage_Device_Abnormality_Detected BSOD is more commonly experienced by developers, making it less frequent for standard users.

According to Microsoft’s official documentation, this particular issue arises when the driver stack encounters responsiveness violations that surpass the acceptable limit or fails to react as expected.

This BSOD message isn’t the only one you might face; we have also discussed similar errors like Attempted_Write_To_Cm_Protected_Storage and Error_Same_Drive 143, so be sure to check those out as well.

Source