Fixing Invalid Kernel Stack Address Error 0x000001CE

The INVALID_KERNEL_STACK_ADDRESS BSOD error is relatively rare, yet it can lead to significant problems on your system. It’s crucial to address this issue, and this guide will walk you through several effective solutions.

How to Resolve the INVALID_KERNEL_STACK_ADDRESS Error

1. Update Your Drivers

1. Access the website of your motherboard’s manufacturer.
2. Locate your specific motherboard model in the provided list.
3. Go to the drivers section for downloads.
   

   

4. Download and install the most recent drivers for all hardware components.

Make sure to also update drivers for your graphics card and any other peripherals you are using. Some users found that outdated NVMe drivers triggered this error, so it’s advisable to keep all drivers updated.

2. Eliminate Overclocking Settings

1. If you’re using tools like MSI Afterburner, iCue, or other RGB management software, uninstall them.
2. Reboot your computer, pressing F2 or Del to enter the BIOS setup.
3. Find the AI Tweaker section within the BIOS.
   

   

4. Reset all values back to their factory defaults.
5. Make sure to save your changes.
6. If you’re unsure of the original settings, simply reset the BIOS to default.

3. Boot into Safe Mode

1. Open the Start Menu.
2. Select the Power icon, then hold down the Shift key while clicking on Restart.
   

   

3. After your PC restarts, select Troubleshoot followed by Advanced options.
   

   

4. Select Startup Settings and restart again.
   

   

5. On the next screen, press F5 for Safe Mode with Networking.
6. Check if the issue persists in Safe Mode.

If the error doesn’t occur, it indicates that a driver or application installed on your system is to blame.

4. Conduct a Clean Boot

1. Press Windows + R and input msconfig.
   

   

2. In the Services tab, check Hide all Microsoft services, then select Disable all.
   

   

3. Click Apply and OK, but refrain from restarting the machine just yet.
4. Launch Task Manager using Ctrl + Shift + Esc.
5. Navigate to the Startup tab and disable all items listed there.
   

   

6. Now, restart your PC.

After rebooting, check for the persisted issues. If resolved, gradually enable the disabled services and applications until you identify the root cause.

5. Utilize System Restore

1. Press Windows + R and enter rstrui.
   

   

2. Choose your preferred restore point, then click Next.
   

   

3. Follow the on-screen instructions to complete the restoration.

If the error persists following a system restore, you may need to perform a Windows repair upgrade. It’s essential to also check your hardware to ensure everything operates correctly.

Tackling the INVALID_KERNEL_STACK_ADDRESS error (0x000001CE) can be challenging; however, we hope these solutions have been beneficial.